30 CBM Semi Tipper Trailer will be sent to Tanzania
Tanzania's customers saw customer feedback on the semi tipper trailer on Google. We found our website through a search and sent an inquiry. Our sales manager Amor contacted the customer immediately and recommended a suitable semi tipper trailer based on the customer's needs.
In addition, detailed quotations are developed based on the customer's preferences. The customer told us that he was comparing prices and there were currently 3 suppliers. Sales manager Amor informed the customer that he could help the customer with professional analysis.
After comparing with Amor, we found that the welding methods of other manufacturers are different from TITAN. They use machines or manual welding, are prone to bending and misalignment, have a significantly reduced load capacity of 30%, and cannot adapt to harsh road conditions. Of course, their prices will also be cheaper.
30 CBM Semi Tipper Trailer will be sent to Tanzania
TITAN adopts advanced fully automatic submerged arc welding process. Molded in one step, it has higher strength, resistance to bending and impact. The load-bearing capacity and service life are increased by 50%.
We hope that customers will have a deeper understanding of the strengths and weaknesses of each manufacturer. After a month of conversation, the customer has great trust in TITAN and is deeply attracted by our professionalism. Finally purchased the TITAN 30cbm semi tipper trailer.
The 30cbm semi tipper trailer is made of high-strength steel, which is stronger. The waterproof edge is 1.49 meters above the ground, which effectively reduces the weight of the vehicle, lowers the center of gravity and height of the semi-trailer, and increases the cargo space.
30 CBM Semi Tipper Trailer will be sent to Tanzania
Many friends often encounter various faults when lifting and unloading the semi tipper trailer when using the semi tipper trailer. The following will explain the common faults and their causes when lifting the semi tipper trailer.
Fault 1: Semi tipper trailer is difficult to lift
There is insufficient oil in the semi tipper trailer fuel tank; the fuel tank filter or pipeline is seriously blocked; the oil pump is faulty and does not supply oil; the lift switch is blocked, the distribution valve and the oil return valve are stuck; the relief valve is seriously out of balance, and the high-pressure oil pump is leaking; The lift cylinder and limit valve are jammed, causing the air path to the main distribution valve to be connected for a long time; the air pressure in the air reservoir is insufficient; the power take-off and oil pump gears are not working properly; the hydraulic oil is not clean and impurities are stuck in the distribution valve.
Fault 2: The semi tipper trailer lifts slowly and has no movement.
If air enters the hydraulic system, it usually means that the oil return line is not smooth, the friction resistance of the lifting cylinder is too large, the limit valve of the lifting cylinder is not tightly closed or is out of balance, the sealing ring of the lifting cylinder is not tightly sealed or worn, and the oil tank is insufficient. , the gear pump cannot reach the specified oil discharge volume; the pipeline is seriously blocked or leaks.
30 CBM Semi Tipper Trailer will be sent to Tanzania
Fault 3: The semi tipper trailer cannot be lifted when the semi tipper trailer is heavily loaded.
Severe overloading; the semi tipper trailer is parked on a slope that is severely tilted forward; the oil viscosity is too low; there are leaks in the pipelines, valves, and cylinders.
Fault 4: Semi tipper trailer is lifted and then falls on its own
Most of them are stuck in the one-way valve; poor sealing of the semi tipper trailer for sale lift cylinder seal; stuck distribution valve and not fully in place; leakage in the pipeline.
Fault 5: semi tipper trailer does not fall down
Insufficient air pressure prevents the distribution valve from returning oil; the limit valve pipeline is damaged, and the lift switch and lift cylinder are stuck.
Fault 6: Semi tipper trailer lifting cannot stop at any position
The oil is too dirty, causing the check valve to be laxly sealed or the distribution valve and oil return valve to be laxly sealed.
